Vintage Star Wars Vehicle Wall Mount Bracket Display Stand X-Wing

This listing is for custom made 3D printed wall brackets for mounting your vintage Star Wars vehicles to your wall. Vintage vehicles are considered the vehicles produced for the 3.75" figures from 1978 to 1984. These MAY fit the 90's era POTF vehicles, but I have NOT tested them on all POTF versions yet. See the list below for know POTF or other version compatibility. If you would like to test them on other lines, please contact me! You can display your vintage Star Wars vehicles with the following brackets: the Millennium Falcon - comes with a latch/hook to hold the back canopy in place. Fits the vintage and the electronic POTF Falcon. Slave 1 - fits vintage and POTF A-Wing Fighter - fits vintage Droids A-Wing and POTF. Extend landing gear and hook into rear landing gear opening. X-Wing Fighter - fits vintage standard, vintage Battle Damaged, Power Of the Force, and 2004 Original Trilogy X-Wings. Y-Wing Fighter - requires the battery cover to be removed. Will work with Y-Wing facing up or down. Video on battery cover removal: B-Wing Fighter - requires the landing gear to be extended. Place the rectangular landing gear in the hole in the bracket, then close in the hooks from either side to latch it in place. Rebel Transport - requires the escape hatch to be removed. Rebel Transport must face up. Snowspeeder Landspeeder Twin Pod Cloud Car - I find the canopies want to open if you face it up, so I recommend facing it down. Imperial Cruiser/Troop Transporter - There is a screw on the vehicle that needs to get centered in the slot on the bracket - see pic. Slide nose end in first to engage hook, then set level against the wall. TIE Fighters - there are 3 versions: TIE Fighter - vintage standard, vintage Battle Damaged, and POTF TIE Darth Vader TIE Fighter (does NOT fit the POTF Vader Advanced TIE) TIE Interceptor - fits vintage and POTF The standard TIE mount does fit all the TIES listed, but for Vader and Interceptor, additional spacers are needed to accommodate the depth of the wings - which we provide when those versions are purchased. If you are handy, you can make your own spacers. For Darth Vader's TIE Fighter, you will need to make a 3"x3"x3" cube to mount the bracket on . For the TIE Interceptor, you will need to make a 3"x3"x3/4" spacer to mount the bracket on. These can be made from wood, or 3D printed, see the photos under the TIE listing for examples. The regular TIE hanger does not need any additional spacers for the standard or Battle Damaged TIEs. The Vader and Interceptor kits come with everything you need to mount those versions. I include an easy self tapping screw-in drywall anchor and screw with each bracket. All you need is a drill or even just a screwdriver! A tape measure helps if you want things lined up nicely too I guess... See a video on how to install the brackets here: I combine shipping on multiple purchases. Pricetronic will automatically combine shipping on multiple items from this listing. Request an invoice when purchasing different listings to get the combined total. I have put a lot of effort into developing and testing these brackets. They are very sturdy - tested for a week holding a 15 pound weight with no issues (for reference, the Falcon comes in a little over 3 lbs). I have these in use with my own collection. Having said that - these are use at your own risk! (I'm not responsible for toys crashing to the ground...) I do tweak the designs as I identify opportunities for improvement or the ability to speedup the 3D printing process - so the items you receive may look slightly different than the pictures and videos show. About 3D Printed items: They may have minor visual defects from the printing process. This is normal and does not impact function. Plus, you can't really see these brackets from behind the vehicles.
Visit
for other hard to find vintage Star Wars parts,
, and
! About Galactic Collector: I am a collector of vintage Star Wars action figures, vehicles, and playsets. I regularly restore vintage pieces. I never part out complete items. I often buy broken/damaged/parts lots for salvage, and will resell leftover parts from those to hopefully benefit other restorers out there.

Returns Accepted for this item if it's within 30 Days